K5 COMPACT – Seam Machine
This Non-Stop machine features Automatic Cantilever Turret Unwind & Cantilever Turret Rewind. Both Servo & AC Motor technologies available for 300M/MIN and 400M/MIN speeds. The machine is available in a 350mm lay-flat model. Non-Stop production translates to higher production, lower waste and savings in inspection cost.This Non-Stop machine features Automatic Turret Unwind & Turret Rewind. The machine is available in 350mm 500mm & 800mm lay-flat models. Non-Stop production translates to higher production, lower waste and savings in inspection cost.
Machine Specification - K5 - COMPACT
- Speed 400 m/min
- Widths 350 mm
- Material Widths 850 mm
- Unwind Diameter 600 mm
- Rewind Diameter 600 mm
- Minimum Lay Flat Width 55 mm with 18 mm Option
- Core Diameter 3" (76 mm )
- Lay Flat Tolerence 0.25 mm
- QC Package - Lay Flat Monitor & Report
- Micro Edge Guide for Solvent Needle
- UV Sensor
Our customers are companies with fast growing operations in the market.
Films Always Straight Through Machine
Never forced side to side for oscillation. Even with turrets; complete turret moves back and forth on heavy duty linear bearings.
Precision Solvent Application
Direct Injection Needle Type Solvent Application with Proportional Solvent Controlled Integrated to PLC.
Fully Adjustable Forming System
Multiple Configurations to meet specific Converter Demands
Tightest lay flat tolerance in the industry
Precise Tension Control via Unwind & Rewind Load Cell System with Closed Loop Via PLC
Robust design & easy operator friendly Control System
Our team truly understands business; cross trained in Sleeve Application. Karlville Technicians are considered among the best in the Shrink Sleeve Business.
QC Package – Lay Flat Monitor & Report
Lay Flat Measuring System allows Operator to Input Tolerance Range; if Outside of Set Tolerance Range Alarm is Triggered.
Sensors Automatically See Film and Move into Position.
Easy to View Graphical Interface
Option: Reporting Wed Width & Meter Counter Allows Remote Access by Wifi
Micro Edge Guide for Solvent Needle
Fiber Optic Sensor works along with Stepper Motor to align the solvent needle to the edge of the film.
Excellent Needle Positioning– This innovative device allows for excellent needle positioning without the worry of micro movements caused by roll changes, splices or slitter stops.
Micro Edge Guide– At 300 M/MIN, the micro edge guide will make quick movement to keep solvent at film edge.
Device Origin– This device was originally created for converters that ran blown film with uneven thickness and edges.
NO Longer Need to Stop due to Adjust Needle– Operators are continually adjusting the placement of the needle to the edge of the film. Operators worry about micro movements that will place the solvent inside or outside the required placement. Your operator will no longer need to adjust needle during each roll change, splice or slitter stops as the device automatically adjusts to the required edge.
Open Seam Detector detect un seamed material via UV sensor at 300-500 meters per minute.