SLIT – HS PRO
The SLIT HS PRO series slitter is ideal for all types of flexible packaging materials as well shrink sleeve material. The slitting section was designed specifically for shrink sleeve converters that requires high quality slitting with PETG materials. When slitting PETG material, dull knifes or improper web path configurations cause beveled edges.
Beveled edges are the industry’s biggest problem with uneven solvent seams as well as open / stuck seam problems. Our specific tangential shear path along with Tidland Pneumatic Knife configuration allow converters to slit with precision and upmost quality. As narrow web converters grow their shrink sleeve business, consideration for a wide web slitter helps to lower total operational costs plus lower lead times with special cuts. The introduction of wide web stock rolls to an established shrink sleeve business is one of the most important decisions as you grow shrink sleeve business.
Material to be processed:
Shrink Sleeve Materials
Plastic films made from PE, PP, PET, PVC,
Papers and laminates.(depending on material type and thickness)
Rigid films: 10~200 micron / Soft films:12~300 micron
Machine Specification - SLIT HS PRO
- Web width 1300 mm max
- Unwind roll diameter 1000 mm. – Independent Unwind
- Unwind roll weight 1,200 kg max
- Unwind roll cores 3” I.D. / 6” I.D. (option)
- Finished roll diameter 610 mm max
- Finished roll cores 3” I.D. / 6” I.D. (option)
- Slit width 50 mm and up (Lower Upon Request)
- Knifes Shear, Razor & Pneumatic Shear with Tangential Web Path
- Machine speed max 500 m/min (depending on material type/quality)
- Winding tension 0.5 pli to 2.5 pli standard
- Features - Vacuum Hug Drum
- Features - Human Machine Interface
- Features - Pivot Roll Unloading Device
- Splice and Inspection Table
- Segmented Lay-On Roller
Vacuum Hug Drum
Benefits
- Absolute Tension Isolation between Unwind and Rewind
- Slip Free Web Transport
- Avoids Wrinkles
Main Drive
Higher Efficiency vs. Nip Design
Allows maximum Machine Speed while maintaining precise tension control
Human Machine Interface – HMI
- High Resolution Colors
- Long Life Service
- All models come standard with integrated operator panels
Pivot Roll Unloading Device
Benefits
- Ideal for Large Diameter Heavy Rolls
- Operator Safety when unloading Rolls as Shaft rotates to safe unloading position
Splice and Inspection Table
Ideal for additional doctoring capacity
The slitting process is accomplished at higher precision
Three versions inspection and splicing section
- Inspection table with splice table
- Splice table only
- Inspection table only
Strobe Light Sync to Speed
Segmented Lay-On Roller
Located on same square bar with pneumatic pressure ledge as full width lay-on roller
Benefits
- Independent Pressure on Each Rewind Roll
- Able to handle 5-7mm Rewind Diameter difference
- Fast change over from Full Width to Segmented Lay-on rollers and vise versa
- Fast repositioning for different Finished Roll width
