SLIT – HS CLASSIC

The SLIT HS CLASSIC series slitter is ideal for all types of flexible packaging materials with razor slitting technology. The machine is designed for the budget conscious flexible packaging converter that will dedicate the machine to razor slitting.

The SLIT HS CLASSIC PRO upgrade is ideal for all types of flexible packaging materials as well shrink sleeve material. The slitting section is modified specifically for shrink sleeve converters that requires high quality slitting with PETG materials. When slitting PETG material, dull knifes or improper web path configurations cause beveled edges. Beveled edges are the industry’s biggest problem with uneven solvent seams as well as open / stuck seam problems. Our specific tangential shear path along with Tidland Pneumatic Knife configuration allow converters to slit with precision and upmost quality.  As narrow web converters grow their shrink sleeve business, consideration for a wide web slitter helps to lower total operational costs plus lower lead times with special cuts. The introduction of wide web stock rolls to an established shrink sleeve business is one of the most important decisions as you grow shrink sleeve business.

 

Machine Specification - SLIT HS CLASSIC

  • Web width 1300 mm max
  • Unwind roll diameter 1000 mm. – Independent Unwind
  • Unwind roll weight 1,200 kg max
  • Unwind roll cores 3” I.D. / 6” I.D. (option)
  • Finished roll diameter 610 mm max
  • Finished roll cores 3” I.D. / 6” I.D. (option)
  • Slit width 50 mm and up (Lower Upon Request)
  • Knifes Razor Only
  • Machine speed max 500 m/min (depending on material type/quality)
  • Winding tension 0.5 pli to 2.5 pli
Information
  • Upgrade Option with LasX
  • Vacuum Hug Drum
  • Human Machine Interface - HMI
  • Pivot Roll Unloading Device
  • Splice and Inspection Table
  • Segmented Lay-On Roller

Upgrade Option with LasX

Laser Downweb Module (LDM) is ideal for straight-line or down-web laser scoring, slitting and perforating of roll-fed or conveyed materials such as flexible films, aluminum foils and paper sheets. Laser Processing Module (LPM) is ideal for for laser cutting, scoring, perforating, engraving and ablating of any pattern or shape in 2D or 3D format. Max part size or processing area can be defined from 70 x 70mm (2.75″ x 2.75″) to 1250 x 1250mm (49.2″ x 49.2″). The LPM module can be optimized for specific processes where speed and accuracy are critical. Ask about the LPM GT, LPM flex, LPM dm or LPM xd. Optimize your manufacturing workflow with LasX’s patented LaserSharp® advanced laser technology and control software.

Picture1

Vacuum Hug Drum

Benefits

  • Absolute Tension Isolation between Unwind and Rewind
  • Slip Free Web Transport
  • Avoids Wrinkles

Main Drive

Higher Efficiency vs. Nip Design

Allows maximum Machine Speed while maintaining precise tension control

Human Machine Interface – HMI

Picture2

  • High Resolution Colors
  • Long Life Service
  • All models come standard HMI integrated

Pivot Roll Unloading Device

Picture3

Picture4

Benefits

  •   Ideal for Large Diameter Heavy Rolls
  •   Operator Safety when unloading Rolls as Shaft rotates to safe unloading position

Splice and Inspection Table

Picture5

Ideal for additional doctoring capacity

The slicing process is accomplished at higher precision

Three versions inspection and splicing section

  • Inspection table with splice table
  • Splice table only
  • Inspection table only

Strobe Light Sync to Speed

Segmented Lay-On Roller

Picture1

Located on same square bar with pneumatic pressure ledge as full width lay-on roller

Benefits

  • Independent Pressure on Each Rewind Roll
  • Able to handle 5-7mm Rewind Diameter difference
  • Fast change over from Full Width to Segmented Lay-on rollers and vise versa
  •  Fast repositioning for different Finished Roll width
Related Videos
Contact Us Now

Contact Us

We look forward to receiving your questions and comments and we will reply to your email promptly.